Choe, KH., Lee, DS., Seo, WJ., & Kim, WN. (2004). Properties of Rigid Polyurethane Foams with Blowing Agents and Catalysts.
Polymer Journal,
36, 368-373.
Croop, B., & Loba, H. (2009). Selecting Material Models for the Simulation of Foams in LS_DYNA. Proceedings of 7th European LS_DYNA Conference Salzburg Austria: 1-6.
Gama, BA., & Gillespie, JW. (2011). Finite Element Modeling of Impact, Damage Evolution and Penetration of Thick-Section Composites.
International Journal of Impact Engineering,
38(4), 181-197.
https://doi.org/10.1016/j.ijimpeng.2010.11.001
Gibson, LJ., & Ashby, MF. (1997). Cellular Solids: Structure and Properties. 2nd Edition Cambridge University Press: Cambridge.
Jang, CH., Shim, CS., Song, HC., & Song, CY. (2013). Study on Cryogenic Behavior of Reinforced Polyurethane Foam for Membrane Type LNG Carrier.
Journal of Ocean Engineering and Technology,
27(1), 74-79.
https://doi.org/10.5574/KSOE.2013.27.1.074
Kim, JH., Park, DH., Choi, SW., & Lee, JM. (2017). Cryogenic Mechanical Characteristics of Laminated Plywood for LNG Carrier Insulation System.
Journal of Ocean Engineering and Technology,
31(3), 241-247.
https://doi.org/10.5574/KSOE.2017.31.3.241
Kim, WT., & Choi, HY. (1996). Finite Element Modeling of Low Density Polyurethane Foam Material. Transaction of Korean Society of Automotive Engineers, 4(2), 183-188.
Lavijas Finieris. (2017). Plywood Handbook, Lavijas Finieris Laboratory, Latvia.
Lee, CS., Kim, MH., & Lee, JM. (2012). Development of Anisotropic Viscoplastic-damage Model for Glass Fiber Reinforced Polyurethane Foam and its FE Application. Proceedings of 2012 Conference of the Korean Association of Ocean Science and Technology Societeties Daegu Korea: 746-750.
Lee, JH., Choi, WC., Kim, MH., Kim, WS., Noh, BJ., Choe, IH., & Lee, JM. (2007a). Experimental Assessment of Dynamic Strength of Membrane Type LNG Carrier Insulation System.
Journal of the Society of Naval Architects of Korea,
44(3), 296-304.
https://doi.org/10.3744/SNAK.2007.44.3.296
Lee, JH., Kim, TW., Kim, MH., Kim, WS., Noh, BJ., Choe, IH., & Lee, JM. (2007b). Numerical Assessment of Dynamic Strength of Membrane Type LNG Carrier Insulation System.
Journal of the Society of Naval Architects of Korea,
44(3), 305-313.
https://doi.org/10.3744/SNAK.2007.44.3.305
Lee, SG., Lee, IH., & Baek, YH. (2010). Wet Drop Impact Response Analysis of Cargo Containment System in MLNG Carrier using FSI Technique of LS-DYNA. Proceedings of the Twentieth International Offshore and Polar Engineering Conference, International Society of Offshore and Polar Engineers Beijing China: 206-210.
LSTC. (2012). LS-DYNA User’s Manual, LSTC, Livermore CA.
Park, SB., Kim, JH., & Lee, JM. (2014). Comparative Study on Mechanical Behavior of Low Temperature Characeristics of Polymeric Foams for Ships and Offshore Structures.
Journal of the Society of Naval Architects of Korea,
51(6), 495-502.
https://doi.org/10.3744/SNAK.2014.51.6.495
Zhang, J., Kikuchi, N., Li, V., Yees, A., & Nusholtz, G. (1998). Constitutive Modeling of Polymeric Foam Material Subjected to Dynamic Crush Loading.
International Journal of Impact Engineering,
21(5), 369-386.
https://doi.org/10.1016/S0734-743X(97)00087-0