Arswendy, A., & Moan, T. (2015). Strength and stiffness assesssment of an LNG containment system – Crushing and buckling failure analysis of plywood components.
Engineering Failure Analysis,
48, 247-258.
Barron, RF. (1985). Cryogenic systems. 2nd Edition Clarendon Press: Oxford.
Choi, S., & Sankar, BV. (2007). Fracture toughness of transverse cracks in graphite/epoxy laminates at cryogenic conditions.
Composites Part B: Engineering,
38(2), 193-200.
Clark, AF. (1968). Low temperature thermal expansion of some metallic alloys.
Cryogenics,
8, 282-289.
Green, DW., Evans, JW., Logan, JD., & Nelson, WJ. (1999). Adjusting modulus of elasticity of lumber for changes in temperature. Wood Engineering, 49(10), 82-94.
Khashaba, UA. (2004). In-plane shear properties of cross-ply composite laminates with different off-axis angles.
Composite Structures,
65(2), 167-177.
Kim, JH., Choi, SW., Park, DH., Park, SB., Kim, SK., Park, KJ., & Lee, JM. (2018). Effects of cryogenic temperature on the mechanical and failure characteristics of melamine-ureaformaldehyde adhesive plywood.
Cryogenics,
91, 36-46.
Kim, JH., Park, DH., Lee, CS., Park, KJ., & Lee, JM. (2015). Effect of cryogenic thermal cycle and immersion on the mechanical characteristics of phenol-resin bonded plywood.
Cryogenics,
72, 90-102.
Kuo, JF., Campbell, RB., Hoie, SM., Rinehart, AJ., Sandstrom, RE., & Yung, TW. (2009). LNG tank sloshing assessment methodology – The new generation. International Journal of Offshore and Polar Engineering, 19, 241-253.
Moubarik, A., Pizzi, A., Allal, A., Charrier, F., & Charrier, B. (2009). Cornstarch and tannin in phenol-formaldehyde resins for plywood production.
Industrial Crops and Products,
30, 188-193.
Park, SB., Lee, CS., Choi, SW., Kim, JH., Bang, CS., & Lee, JM. (2016). Polymeric foams for cryogenic temperature application: Temperature range for non-recovery and brittle-fracture of microstructure.
Composite Structures,
136, 258-269.
Park, YI., & Lee, JH. (2018). Buckling strength of GTT NO96 LNG Carrier cargo containment system.
Ocean Engineering,
154, 43-58.
Yang, CG., Xu, L., & Chen, N. (2007). Thermal expansion of polyurethane foam at low temperature.
Energy Conversion and Management,
48, 481-485.