A study on the piece creation of hull-structure with PC-CADRA

J. Ocean Eng. Technol. 1997;11(3):191-199.

PC-CADRA에서 선체 내부재 피스(piece)생성에 관한 연구

박제웅,이현상

조선대학교 선박해양공학과,인하대학교 선박해양공학과

Keywords: Counter Clock Wise, Clock Wise, Outer Contour, AUTODEF

핵심용어: 반 시계방향, 시계방향, 외곽선, PCS(확장자가 PCS) 파일 : 피스 엔티티들의 좌표점들을 기록한 파일, PTC(파일 확장자가 PTC) 파일 : 피그 엔티티들의 각각의 좌표점들을 진행순서에 맞게 기록한 파일, IDX(INDEX)파일 : 데이터베이스 구축에 있어 책의 내용과 같은 파일, TRIBON : 조선전용 대형 소프트 웨어

Abstract

This paper develops the piece creation of Hull-structure using PC(Personal Computer) which is from CADRA of graphic program. Large-sized shipbuilding yard was carried out on the development of CNC(Computer Numerical Control) auto cutting system used in super S/W such as AUTODEF, TRIBON. But this system needs lots of expenses and high technician, and only used in large-sized shipbuilding yard, not medium-sized and small-sized shipbuilding yard. To bring up the small and medium-sized ship building yard lacking a little competitive power. Small and medium-sized shipbuilding yard need the piece creation of Hull Structure S/W which is joined with the CADRA. Therefore the piece creation of Hull-Structure S/W is developed to joined with the CADRA of graphic S/W to create the piece to be needed on as auto cutting process using PC.