J. Ocean Eng. Technol. Search


J. Ocean Eng. Technol. > Volume 26(6); 2012 > Article
J. Ocean Eng. Technol. 2012;26(6):14-18.
DOI: https://doi.org/10.5574/KSOE.2012.26.6.014   
Study on Hull Form Development and Resistance Performance of High Speed Aluminum Leisure Boat
Jeong Uh-Cheul,Kim Do-Jung,Choi Hong-Sik
Dept. Of Naval Architecture and Ocean Engineering Inha Technical College,Jeonnam Division Korea Marin Equipment Research Institute,Shinwoo Industrial Co. Ltd.
30피트급 고속 알루미늄 레저보트 선형개발과 저항성능에 관한 연구
인하공업전문대학 조선해양과,한국조선해양기자재연구원 전남분원,신우산업(주)
Key Words: Aluminum leisure boat, Hull form development, Resistance performance, Model test, Circulating water channel
핵심용어: 알루미늄 레저보트, 선형개발, 저항성능, 모형시험, 회류수조
A 30ft class aluminum leisure boat is newly developed and the resistance performances are investigated by a model test at a high-speed circulating water channel. The effect of a fin attached to the side of the hull is studied at two different displacements. Wave patterns are observed to make clear the relationship between the resistance performance and wave characteristics. It can be found that a chine position at the draft line can have a strong effect on the resistance performance around a certain velocity range.


Browse all articles >

Editorial Office
President Office BD Rm. 1302, 13 Jungang-daero 180beon-gil, Dong-gu, Busan 48821, Republic of Korea
Tel: +82-51-759-0656    Fax: +82-51-759-0656    E-mail: ksoehj@ksoe.or.kr                

Copyright © 2019 by The Korean Society of Ocean Engineers. All rights reserved.

Developed in M2community

Close layer
prev next