J. Ocean Eng. Technol. Search

CLOSE


J. Ocean Eng. Technol. 1999;13(2):168-175.    

The Development of Hull form for Turtle Boat Type Incinerating Vessel Considering the Resistance Performance
Lee, Kwi-Joo;Kwon, Kyu-Hyok;Lee, Kon-Chol;
저항 성능을 고려한 거북선 형상의 해상소각선 선형개발
이귀주;권규혁;이건철;
조선대학교 공과대학 선박해양공학과;조선대학교 공과대학 화학공학과;조선대학교 대학원 선박해양공학과;
© 1999 The Korean Society of Ocean Engineers     Open access / Under a Creative Commons License
Keywords: Incinerating Vessel, Resistance Performance, Finite Source Distribution Method, Wave-Making Resistance, LCB, Turtle Boat
핵심용어: 해상소각선, 저항성능, 유한소오스분포법, 조파저항, 종방향부면심위치, 거북선
Abstract
In the present paper, a hull form for the turtle boat type incinerating vessel was developed based on the Finite source Distribution Method(FDM) and 1-$C_p$ method. In order to obtain proper hull form within the limited time and budget, a computer program OCL(Optimization of $C_p$ and LCB) was developed adn used. For the confirmation of the theoretical results by OCL, these theoretical results were compared with results of model test in the circulating water channel (CWC)in Chosun University.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY

Browse all articles >

PUBLICATION ETHICS
FOR CONTRIBUTORS
Editorial Office
President Office BD Rm. 1302, 13 Jungang-daero 180beon-gil, Dong-gu, Busan 48821, Republic of Korea
Tel: +82-51-759-0656    Fax: +82-51-759-0656    E-mail: ksoehj@ksoe.or.kr                

Copyright © 2024 by The Korean Society of Ocean Engineers.

Developed in M2PI

Close layer
prev next