Bang, K.-S., Jung, D.-H., Park, C., Chang, W.-S.. (Effects of Welding Parameters on Tensile Strength of Weld Metal in Flux Cored Arc Welding, Science and Technology of Welding and Joining, 2008). 13(6):509-514 10.1179/174329307X249397.
Byun, J.-C., Bang, K.-S., Chang, W.-S., Park, C.-G., Chung, W.-H.. (Effects of Heat Input and Interpass Temperature on the Strength and Impact Toughness of Multipass Weld Metal in 570MPa Grade Steel, Journal of Korean Welding and Joining Society, 2006). 24(1):64-69.
Dixon, B., Hakansson, K.. (Effects of Welding Parameters on Weld Zone Toughness and Hardness in 690MPa Steel, Welding Journal, 1995). 74(4):122-132.
Evans, G.M.. (The Effect of Heat Input on the Microstructure and Properties of C-Mn All-Weld-Metal Deposits, Welding Journal, 1982). 61(4):125s-132s.
Gianetto, J.A., Smith, N.J., McGrath, J.T., Bowker, J.T.. (Effect of Composition and Energy Input on Structure and Properties of High-Strength Weld Metals, Welding Journal, 1992). 71(11):407s-419s.
Grong, O.. (Metallurgical Modelling of Welding The Institute of Materials, London: 1994.
Mukai, A., Nakano, T., Okamoto, H., Morita, K.. (Investigation on MAG Welding Wires for Building Structure, Steel Construction Engineering, 2000). 7(26):13-25 (in Japanese).
Schumann, G.O.. (The Influence of Welding Variables on Weld Metal Mechanical and Microstructural Properties from Conventional and Microalloyed Rutile Flux-Cored Wires, Trends in Welding Research, 1995). (June):525-534.
Tsukamoto, M., Hatano, I., Tsuji, K., Murata, Y., Ichinohe, Y.. (Features of the Newly Developed Soild Wire for CO2 Gas Shielded Arc Welding under Large Heat Input and High Interpass Temperature Conditions, Welding Technology, 2003). 51(12):93-98 (in Japanese).
Vercesi, J., Surian, E.. (The Effect of Welding Parameters on High Strength SMAW All-Weld-Metal - Part 1: AWS E11018-M, Welding Journal, 1996). 75(6):191s-196s.
Vercesi, J., Surian, E.. (The Effect of Welding Parameters on High Strength SMAW All-Weld-Metal - Part 2: AWS E10018-M and E12018-M, Welding Journal, 1998). 77(4):164s-171s.
Yokoyama, Y.. (The Welding Methods for the Requirement of High-Quality Weld in the Steel Building Fabrication, Welding Technology, 2003). 51(8):80-88 (in Japanese).